亚洲国产综合在线自拍视频682|无码人妻一区二区三区免费手|亚洲欧美日韩精品永久在线|亚洲麻豆av一区二区

    <bdo id="6uzj8"><optgroup id="6uzj8"></optgroup></bdo>

      <bdo id="6uzj8"></bdo>

            <bdo id="6uzj8"><optgroup id="6uzj8"><thead id="6uzj8"></thead></optgroup></bdo>
            详细说明

            SZE-24YCA 2

            收藏
            • 产品说明

            20170314185382508250.jpg

              本機特點:

              PLC控制,油馬達預塑,全液壓驅動,自動循環;

              塑化能力高,塑化溫度可預選自控。

              采用24點計量,使用時根據各工位模具要求,選定注射量。

              設有空模選擇功能。采用變頻轉位。

              采用單缸直拉雙聯板剪式合模機構。

              設有二次壓力注射。設有先后壓楦,合模順序的選擇功能。

              圓盤轉位平穩,快慢調整方便。

              圓盤轉位與塑化,注射工作供油分開控制。

              工位多,定型時間長,易保證鞋底成型質量。

              可選配伺服節能系統, 可節省電量30%左右。

              Structure characteristics:

              PLC controlled,pre plasticized by hydraulic motor,driven by full hydraulic pressure,and cycled automatically.

              High plastifying capacity,the plastifying temperature can be controlled automatically by preselection.

              It adopts 24 points measuring and the injection volume can be chosen according to the requirements of the moulds at each working position.

              The function of empty mould selection has been provided.

              Parallel mould plate closing mechanism is adopted,which linked with a toggle system operated by single cylinder.

              The machine is equipped with two time pressure injection system and the cramp pressing and mould closing order selecting function.

              The round table indexes smoothly and it’s movement can easily be adjusted.

              The round table rotation,plasticizing and oil supply for the injection are controlled independently.

              There are many working positions,the time for setting is longenough,andguarantees the setting quality of shoe soles.

              Selecting servo energy conservation system to save about 30% energy.

              主要技術參數:

            項目/ITEM

            單位/UNIT

            規格/SPECIFICATION

            SZE-24YCA

            2SZE-24YCA

            工位數        Number of stations

            Station

            24

            24

            螺桿直徑      Screw Diameter

            mm

            75

            75 ,70

            螺桿轉速      Screw rotating speed

            r/min

            0-160

            0-160

            螺桿長徑比    Screw length and diameter ratio


            19:1

            19:1 , 18:1

            最大注射容積  Max injection capacity

            cm3

            660

            660 ,580

            塑化能力      Plastifying capacity

            g/s

            40

            40

            注射壓力      Injection pressure

            Mpa

            5.0

            5.0

            圓盤壓力      Disc pressure

            Mpa

            3.0

            3.0

            合模方式      Clamp mould style


            剪式/Scissors

            剪式/Scissors

            提楦行程      Last trip

            mm

            60

            60

            鞋楦高度      Shoe cramp height

            mm

            210-260

            210-260

            ?虺叽      Mould frame dimensions

            mm(LxWxH)

            340x180x60

            340x180x60

            電機功率      The motor power

            KW

            21.5

            36.5

            整機外形尺寸  Outline dimensions of the whole machine

            mm(LxWxH)

            7300x3940x1955

            8400x6800x1955

            整機重量      Total weight of the whole machine

            kg

            13500

            15500

              以上技術規格僅供參考,如有任何變更或修改,恕不另行通知。

              Technical specifications are indicative.Machines may undergo variations and/or modifications whithout any previous notice.

            咨詢電話:0711-3355178

            地址:鄂州市凡口經濟開發區順合路42號

            微信二維碼

            公眾號

            技术支持: 萬家推云平臺 | 管理登录
            ×
            seo seo

              <bdo id="6uzj8"><optgroup id="6uzj8"></optgroup></bdo>

                <bdo id="6uzj8"></bdo>

                      <bdo id="6uzj8"><optgroup id="6uzj8"><thead id="6uzj8"></thead></optgroup></bdo>